Three Phase Dryer (Heater Type)
A
three phase
dryer (heater type) machine
is an appliance that is
used to remove moisture from a load of clothing or other materials after
it has been washed in a washing machine. Most three phase dryer
(heater type) machines consist of a drum that rotates like a tumbler
in which heated air is circulated which in turn evaporates the moisture.
In most cases the tumbler is driven by a belt drive by an induction
motor. After the clothing or materials heat up, the water within them
turns to steam. The exhaust system carries the steam out of the dryer,
usually though a vent or duct that carries it outside.
To ensure that the clothing
doesn't go up in flames on the
three phase dryer (heater type)
machine, they have temperature sensors installed in them. In most
three phase dryer (heater type) machines, there are usually just two
quarter size silver discs, in which one is located near the heating coil
and the other one is located near the front section of the
three phase dryer (heater type)
machine. They also have a
set of contacts so that if the temperature gets to hot, these contacts
will separate and the three phase dryer (heater type) machine
will automatically shut off.
A
three phase dryer (heater type)
machine has to bring in
air to heat in order for everything to work correctly. Most of these
dryers have a hole or ventilation duct that is located on the front of
the machine. The air is sucked through the hole which is then forced
past the heating element. Then the heated air will flow into the tumbler
and start drying the clothes. A fan is used to bring both the air in and
send it back out.
Most
three phase dryer (heater
type) machines
are more apt to be on the industrial size since they use three phase
power. They are used for much larger loads of articles that need to be
dried in the three phase dryer (heater type) machine. The
three phase dryer (heater
type) machine
generally uses a coiled wire that is heated with electric current.
Some of the different places
that these are used are in hospitals, military bases, coin operated
laundromats, apartment buildings, hotels, motels, colleges,
condominiums, or anywhere the need for larger loads of materials
is needed to be dried.
The
three phase dryer (heater
type) machine
must be powered with true three phase power. In order to accomplish
this, a phase converter is used. A phase converter will take the
single phase power source and convert it into three phase power.
To make it true three phase power, a 3 phase generator with power factor
is used. The true three phase converter has become an overwhelming
popular product to ensure that your equipment runs smoothly, efficiently
and safely.
Finding a good quality phase
converter manufacturer is rather important.
ACE
Phase
Converter has
been rated one of the best suppliers of three phase power in the world
today. They have been in business providing three phase power solutions
for more than 25 years and they offer a 10 year guarantee on all of
their products. Not many manufacturers will stand behind their product
like that. So when you are looking to power your
three phase dryer (heater type)
machine, give ACE Phase Converter a call. 1-800-967-7217.
Bookmark This Site:
Three Phase Dryer
(Heater Type)
Other Resources
◙
Rotary Phase Converters
◙
Robin
Generator
◙
Isolation
Transformers
◙
Variable Frequency Drives
◙
Diesel
Generators
◙
Power
Generators
◙
Step Down Transformers
◙
Electrical Transformers
◙
Static
Phase Converter |
