Three Phase Industrial Dryer
The three phase industrial dryer
is used to remove any type of moisture from bulk solids, powders and
other various applications. The type of three phase industrial dryer
needed would depend on what you are actually trying to dry.
The
three phase industrial dryer pretty
much works like a home clothes dryer would. The electrical dryer
heats the air that dries the product. There are basically two types of
three phase industrial dryers. There is the direct three phase
industrial dryer in which the products is in direct contact with
heat and then there is the indirect three phase industrial dryer
in which the product does not come in contact with direct heat. Both of
these types of three phase industrial dryers have several
different types of three phase industrial dryers that are used for
different applications. The three phase industrial dryer
manufacturers, design their dryers to be used with a variety of
different industries, such as food processing, paper, pharmaceutical,
agricultural, pollution control and many others.
Here is a list of some of the
different three phase industrial dryer types in the industry
today:
*Air Dryers - the most common
type of three phase industrial dryer - product come in direct
contact with heat.
*Belt Conveyer Dryers - belt
moves materials through the dryer with continuous feed. Agricultural
products usually use these.
*Compressed Air Dryers -
remove water and contaminants from air and the lines that carry it.
*Flash Dryers - they dry by
using a short burst of high heat. Often used in water treatment
facilities.
*Freeze Dryers - used on such
things like chemical and pharmaceuticals that are usually heat
sensitive.
*Spray Dryers - used on wet
sludge or wet powders and it spins centrifugally, a spray is applied to
the material which rapidly dries it.
Regardless of what type of three
phase industrial dryer you use, it must be operated with some form
of true three phase power. Obtaining three phase power from a
utility company can get mighty expensive, especially in today's economic
resources. The best way and most economical way of obtain three phase
power is from a phase converter. A phase converter will take your single
phase power source and convert it into true three phase power. But it
must have a 3-phase rotary generator with power factor to ensure that it
is definitely true three phase power.
A 5-star rating has been given
to a company by the name of ACE
Phase
Converter for their unique design of their true three
phase converters. They have been found to be one of the best phase
converters on the market today. They have some of the best technicians
available to help you figure out what type of phase converter you will
need to power your three phase industrial dryer or any other
three phase equipment that you may have. They will discuss the different
sizes and loads that are available with their phase converters. You
can't go wrong with ACE Phase Converter as they have been solving three
phase power issues for more than 25 years.
Bookmark This Site:
Three Phase Industrial
Dryer
Other Resources
◙
Rotary Phase Converters
◙
Robin
Generator
◙
Isolation
Transformers
◙
Variable Frequency Drives
◙
Diesel
Generators
◙
Power
Generators
◙
Step Down Transformers
◙
Electrical Transformers
◙
Static
Phase Converter |
