Three Phase Joiner
A three phase joiner is a
machine that joins together pieces of wood to create furniture,
structures, toys and various other applications. It is sometimes called
a three phase jointer.
A
three phase joiner consists of two
tables that are parallel to each other, a moveable fence that is
perpendicular to the tables and a cutter head which is driven by a
motor. One of the tables on the three phase joiner is called the
infeed table. This table is the one that feeds the workpiece into the
machine. The other table is called the outfeed table. This table is
where the workpiece goes after it leaves the cutter. The cutter head on
the three phase joiner contains two or more knives which have
very sharp edges. As the cutter head spins the knives come in contact
with the workpiece to be cut on the three phase joiner. Most
three phase joiners have several indexing knives that can be rotated
to any new edge when necessary.
The infeed and outfeed table on the
three phase joiner can be raised or lowered independently of each
other. This is done so that you can get a better depth from the cutting
head. The three phase joiner can be used for straightening boards
that are bowed and also can be used for untwisting boards. The three
phase joiner is very often used in an industrial setting.
The three phase joiner or
jointer must be run off of three phase power to operate safely and
efficiently. A solution to getting three phase power would be a
quality phase converter. The phase converter has become a very popular
way of converting single phase power into true three phase power. A
three phase converter system has three circuits that are used to carry
three alternating currents, which are of the same frequency. They each
reach instantaneous peak values at three different times which results
in a constant flow of electricity. The phase converter should always
have a 3-phase rotary generator with power factor correction to ensure
that you are getting true three phase power. It if does not have this,
you will only be getting enough three phase power for an initial start
up on your three phase joiner.
Always make sure that you are
purchasing a quality true three phase converter that has 100% copper
windings and wiring. This will ensure that the three phase joiner
will last you for many years of operation. ACE
Phase
Converter is one of the leading manufacturers of just
such a quality phase converter. They have been designing and
manufacturing these impeccable phase converters for over 25 years. They
provide solutions, worldwide, to any or all three phase issues. You
can't go wrong when you give ACE Phase Converter a call at
800-967-7217.
Bookmark This Site:
Three Phase Joiner
Other Resources
◙
Rotary Phase Converters
◙
Robin
Generator
◙
Isolation
Transformers
◙
Variable Frequency Drives
◙
Diesel
Generators
◙
Power
Generators
◙
Step Down Transformers
◙
Electrical Transformers
◙
Static
Phase Converter |
