Three Phase Line Bore
A three phase line bore
is a tooling machine used for enlarging holes in wood or metal. A
three phase line bore should have what we call a tailstock to
achieve line boring. A tailstock is a device used on the three phase
line bore that supports the longitudinal rotary axis of the
workpiece that is being machined.
A
three phase line bore usually works
with workpieces that are long and slender. By using the tailstock on the
three phase line bore, you can bore holes with the cutter
supported on both ends of the hole. The three phase line bore is
used to achieve better accuracy with the diameter of the hole.
Tapered holes can also be cut using the three phase line bore.
The three phase line bore
machine can come in a variety of sizes and styles. Workpieces can
be as large as 60 ft when using a three phase line bore. The
control systems on a three phase line bore can also be computer based
which allows for complete automation and consistency. The three phase
line bore usually has a protruding arm on the machine that holds the
cutting tools. It must be very rigid and is called the boring bar.
Three phase power must be used to
operate the three phase line bore machine. Since some of them can
be computerized, a CNC phase converter would be a good choice. If not, a
three phase rotary phase converter would work to power the three
phase line bore. The CNC phase converter and the rotary phase
converter are much of the same. They both have a three phase generator
with power factor correction. They both have three phase circuitry that
produces a very balanced form of electricity. What a phase
converter does is basically convert the single phase power source into
three phase power. This will provide the three phase line bore
with safe and efficient true three phase power. If the phase converter
is installed properly, the three phase line bore should last you
for more than 35 years with very little maintenance and or breakdown.
A good quality phase converter on the
market today is manufactured by ACE
Phase
Converter. When they designed their phase
converters, they had the CNC in mind. So you can purchase a good quality
phase converter that has CNC capabilities from them. They have been
providing three phase solutions for many years and have expert
technicians that can help you decide what type of phase converter you
need as to what size and load. You will just need to answer a few
questions and they will do the rest. They will offer you a 10 year
warranty on all their products. So you can't go wrong when you contact
ACE Phase Converter. Your three phase line bore will operate
smoothly for many years to come by doing so.
Bookmark This Site:
Three Phase Line Bore
Other Resources
◙
Rotary Phase Converters
◙
Robin
Generator
◙
Isolation
Transformers
◙
Variable Frequency Drives
◙
Diesel
Generators
◙
Power
Generators
◙
Step Down Transformers
◙
Electrical Transformers
◙
Static
Phase Converter |
