Three Phase Nibbler
 Sometimes
when you cut sheet metal, distortion of the metal happens. To
alleviate this, the three phase nibbler was invented. The
three phase nibbler is used for serious metal cutting. The
three phase nibbler has been used in the sheet metal and bodywork
industries for many years. Cutting through sheet metal isn't an easy
task and with the three phase nibbler, it makes the task much
easier and smoother.
When you use a
three phase nibbler,
it is always best that you drill a small pilot hole before you start
cutting with the three phase nibbler. When the three phase
nibbler starts, it nibbles through the metal with one small crescent
at a time. There is one type of three phase nibbler that operates
a lot like a punch and die. It has a blade that will move in a line that
is against a fixed die and then will remove bits of metal and leave you
a notch. The other type of three phase nibbler works
relatively like tin snips. It shears the metal sheet on two parallel
tracks that are 3-6mm apart. This type of three phase nibbler
then rolls up the wasted metal in a very tight spiral as it is cutting
through the metal.
The three phase nibblers has
been used to cut through stainless steel, sheet metal and corrugated
metals. You will see roofers use the the three phase nibbler when
installing a metal roof. The three phase nibbler is used in
various applications such as commercial vehicle manufacturing,
shipbuilding, tank and container construction, sheet metal projects, any
metal structure, elevator construction, coil lines, sign manufacturing,
frame and cabinet manufacturing as well as sunroof installation.
The three phase nibbler should
be operated with three phase power. A phase converter is an
excellent choice to achieve three phase power. A phase converter
simply converts the single phase power source into three phase power. A
single unit phase convert is able to provide a continuous, reliable
source of three phase power to more than on piece of equipment. Always
make sure that it is true three phase power when you purchase a phase
converter. A true three phase converter will always have a balanced
3-phase generator with power factor correction. If the phase converter
is properly installed, it should operate your three phase nibbler
for 35 years or more with little or no maintenance.
ACE
Phase
Converter is an
excellent manufacturer of phase converters. When you purchase from
ACE Phase Converter, you are always guaranteed that you are getting that
true three phase power to your three phase nibbler or any other
equipment. Their phase converters have been perfected by their
specialized engineers. Each system is tested over and over again before
it is ever put on the market. They use quality materials like 100%
wiring and windings on every phase converter. ACE Phase Converter has
been solving three phase issues, worldwide, for more than 25 years and
they stand behind every product with a 10 year warranty.
Bookmark This Site:
Three Phase Nibbler
Other
Resources
◙
Rotary Phase Converters
◙
Robin
Generator
◙
Isolation
Transformers
◙
Variable
Frequency Drives
◙
Diesel
Generators
◙
Power
Generators
◙
Step
Down Transformers
◙
Electrical Transformers
◙
Static
Phase Converter |
Three
Phase Nibbler 