Three Phase Punch
A three phase punch
is a machine that is used to punch holes or shapes in metal. It is used
to form and cut the metal. The three phase punch has a clamp that
holds down the metal and the punch forms it to a predetermined shape.
A die set is usually used in the
three phase punch. A die set consists of male punches and female
punches. The punch on the
three phase punch is usually some
sort of hard metal rod that has a shaped tip on it. There are several
punches that are used on the three phase punch. There is a center
punch, a prick punch, a transfer punch, a pin punch and doming punches.
Each of these punches perform different shapes to the metal involved.
Some three phase punches are
operated by CNC (computer numerical control). If this is the case, then
a computer is programmed to operate the three phase punch.
Sometimes setting up a three phase punch can be time consuming. The
three phase punch is used for high volume production. A 60 ton three
phase punch is commonly used in metal processing industries.
The three phase punch should
be operated with three phase power versus single phase power.
Single phase power will only cause your three phase punch to
overheat and possibly become severely damaged. Since single phase power
is usually all we have, so an alternative to this must be met.
This is where a three phase converter can come into play. This is a much
more economical way of supplying three phase power to your three
phase punch, then to contact the utility company. They have a
tendency to charge an arm and a leg for three phase power. A three phase
converter basically converts the single phase power source into three
phase power. True three phase power can be achieved with a phase
converter as long as it has a 3-phase generator with power factor
correction. This ensures that the three phase punch will
now be receiving a balanced, reliable source of true three phase power.
Your equipment should last for years on end if the phase converter is
installed properly.
Finding a good true three phase
converter is easy if you just give ACE
Phase
Converter a call at 1-800-967-7217. They have been
providing true three phase solutions to their customers, worldwide, for
over 25 years. Each of their phase converters have been tested and
re-tested until they were perfected. It's all in the name and as you can
see ACE Phase Converter is all about phase converters.
Bookmark This Site:
Three Phase Punch
Other
Resources
◙
Rotary Phase Converters
◙
Robin
Generator
◙
Isolation
Transformers
◙
Variable
Frequency Drives
◙
Diesel
Generators
◙
Power
Generators
◙
Step
Down Transformers
◙
Electrical Transformers
◙
Static
Phase Converter |
Three
Phase Punch 