Three Phase Thickness Planer
A three phase thickness
planer is a woodworking machine. It is used too create boards
that are of unleveled thicknesses throughout their entire length
along with the flatness on the upper surface. The three phase
thickness planer is capable of working on very wide boards and
removes large amounts of material in one single pass.
The three phase thickness planer
is driven by a powerful motor and are heavy duty constructed.
To operate the
three phase thickness planer, the
table is always set to the correct height and then the board is fed into
the machine. It will make contact with the feed roller which grips the
board and will feed it into the machine and past the cutting head. The
knives on the three phase thickness planer will remove material
on the way through the machine and the out feed roller will pull the
board through. The board will get ejected from the three phase
thickness planer at the end of the pass.
Since wood often bends and warps, the
three phase thickness planer is used to create relatively flat
boards. After using the three phase thickness planer, the
board should have two flat and parallel faces. If more material needs to
be removed, the board is fed through the three phase thickness planer
again and again until the correct thickness is achieved.
Three phase power is suggested to be
used when using the three phase thickness planer as single phase
power can cause severe damage to the equipment. A true three phase
rotary phase converter can be used with the three phase thickness
planer to achieve this three phase power. A rotary phase
converter is one of the most popular used converters on the market today
to achieve three phase power in areas where it is not available from the
utility companies. A single three phase converter unit can provide a
continuous, reliable, balanced form of three phase power to more than
one machine. The rotary three phase converters use their own motor to
generate the third, high leg of power which then passes on the other two
legs of power that is provided by the single phase power source. They
work very well with supplying three phase power to woodworking machinery
like the three phase thickness planer. A true three phase
rotary phase converter will always have it's own 3-phase generator with
power factor correction. This ensures the life of your equipment to last
for more than 35 years or more as long as it is installed properly.
One of the best manufacturers on the
market today for true three phase rotary phase converters is ACE
Phase Converter. They use 100% quality copper on their
wiring and windings. Their phase converters produce three phase power
just like a power plant does by using an active hybrid generator to
supply the third high leg of power. ACE Phase Converter guarantees you
will be a satisfied customer by offering a 10 year warranty on all of
their phase converters. The three phase thickness planer will run
beautifully for many years to come by using an ACE Phase Converter
product.
Bookmark This Site:
Three Phase Thickness
Planer
Other
Resources
◙
Rotary Phase Converters
◙
Robin
Generator
◙
Isolation
Transformers
◙
Variable
Frequency Drives
◙
Diesel
Generators
◙
Power
Generators
◙
Step
Down Transformers
◙
Electrical Transformers
◙
Static
Phase Converter |
Three Phase Thickness Planer