Three Phase Tire Balancer
The
three phase tire balancer is a machine that is used for balancing
tires. The three phase tire balancer distributes mass within an
automobile tire and or wheel to which it is attached. When a tire
rotates, the absence of symmetry of mass can cause the wheel to wobble.
This type of wobbling can cause disturbances such as vertical and
lateral vibrations. This unbalance will usually increase with speed. The
three phase tire balancer can correct these imbalances.
Tires are inspected at the factories
by using the
three phase tire balancer. The tire
is mounted on the three phase tire balancer machine and the speed
of the tire is accelerated up to 300 RPM or higher. The sensors on
the three phase tire balancer measure the force of the unbalance
as the tire rotates at this speed. The three phase tire balancer
determines the amount and angle of the unbalance of the tire.
The three phase tire balancer
is also used at many automotive repair shops. When they find that the
tire is not in balance, balance weights are generally fitted to the
outer and inner flanges of the wheel. These weights that are installed
are usually made of lead but due to the toxic level of some of these
leads, less toxic alternatives are in the making to install on the
wheels once the three phase tire balancer determines the
unbalanced need for the weights.
The three phase tire balancer
is designed to operate using three phase power. Since most locations
that require a three phase tire balancer, don't have three phase
power installed, an alternative must be used. The utility company could
come out and install three phase power, but the cost is going to be
huge. A good economical choice would be the three phase converter.
The three phase converter takes the single phase power source and
converts it into three phase power This is done by
using the three circuits in
the three phase converter to carry three alternating currents of the
same frequency that reach instantaneous peak values at three different
times. The circuits in the three phase power load will carry electrical
current that operates in three different phases. This results in a
constant flow of electricity going to the three phase tire balancer.
With a smoother form of power that is accomplished with the three phase
converter, your equipment is operating safely and efficiently and
eliminates overheating and or breakdown. You will always want to make
sure that if you purchase a three phase converter, that you are getting
true three phase power. A true three phase converter will always
have a 3-phase rotary generator with power factor correction and it will
be manufactured with quality components such as 100% copper wirings and
windings.
One of the leading manufacturers of a
true three phase converter is
ACE
Phase
Converter.
This company has been in business for over 25 years solving three phase
power solutions, worldwide to their customers. ACE Phase Converter
designed their phase converters just like a power plant brings three
phase power to you. A hybrid rotary generator is used to spin off of the
single phase power supply and it generates a third line of power to your
equipment. This ensures that you are getting true three phase power,
actually better than the utility company can provide you. ACE Phase
Converter technicians are there to answer any or all of your three phase
power questions or concerns. They stand behind each and every product by
offering the consumer a 10 year warranty. You can't go wrong when
you power your three phase tire balancer with a product from ACE
Phase Converter.
Bookmark This Site:
Three Phase Tire Balancer
Other
Resources
◙
Rotary Phase Converters
◙
Robin
Generator
◙
Isolation
Transformers
◙
Variable
Frequency Drives
◙
Diesel
Generators
◙
Power
Generators
◙
Step
Down Transformers
◙
Electrical Transformers
◙
Static
Phase Converter |
Three Phase Tire Balancer